Table of Contents
Advertisement
Before Use
<Preparations>
1
Fill the water tank with fresh cold water.
Push the dispenser up into the upper position.
1
Push the water tank and pull it out.
2
Fill the water tank with tap water up to "Max"
3
(maximum) line.
Dry off the out side of water tank.
Replace the water tank.
4
Push it until it snaps in.
Note
• Do not fill the water tank with milk (including soy and rice milk), mineral water, sparkling water or hot water etc. Only use tap
water.
• When filling the water tank with water, hold the bottom of the water tank with both hands.
EN14
"Max" (maximum) line
"Min" (minimum) line
Hide quick links:
Advertisement
Table of Contents
