Getting Started; Turning On; Aps Mode - Pioneer XW-BTS3 Operating Instructions Manual

Turning on

[STANDBY/ON]
Press
This unit switches to the last select mode.

APS mode

• After this unit is kept inactive for 20 minutes, it automatically switches to the standby
mode.
• When 5 minutes before switching to the standby mode automatically, the indicator starts
to blink.
How to turn off the APS mode
• Press and hold
indicator lights red for about 3 seconds.
• If the APS mode is turned on again, Press and hold
mode and the indicator lights green for about 3 seconds.
Note
• When you play at low volume, this unit might switch to the standby mode automatically.
Please increase the volume, or turn off the APS mode.

Getting started

button. The indicator would light.
[Mute] button to turn off the APS mode in the standby mode and the
[Mute] button in the standby
13