Lexus LS 460 Owner's Manual page 52

®
2. Bluetooth SETTINGS
3
Select the desired connection.
When another Bluetooth
nected
 To disconnect the Bluetooth
select "Yes".
4
Check that a confirmation screen is dis-
played when the connection is com-
plete.
 If an error message is displayed, follow the
guidance on the screen to try again.
INFORMATION
●It may take time if the device connection
is carried out during Bluetooth
playback.
●Depending on the type of Bluetooth
device being connected, it may be neces-
sary to perform additional steps on the
device.
●When disconnecting a Bluetooth
device, it is recommended to disconnect
using the system.
52
LS460_600h_Navi_U
■ AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* Power" to on. (P. 56)
Leave the Bluetooth
tion where the connection can be estab-
lished.
 When the engine <power> switch is in
ACCESSORY or IGNITION ON <ON>
®
device is con-
mode, the system searches for a nearby
registered device.
®
device,
 The system will connect with the registered
device that was last connected, if it is
nearby.
■ CONNECTING MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
®
Press the "MENU" button on the
audio
Remote Touch and select "Setup".
®
2
Select "Bluetooth*".
3
Follow the steps in "CONNECTING A
Bluetooth
®
(P. 51)
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
®
device in a loca-
®
man-
®
DEVICE" from "STEP 2".