1. BASIC INFORMATION BEFORE OPERATION
2. HOW TO USE THE Remote Touch
This system can be operated by the
Remote Touch when the engine
<power> switch is in ACCESSORY or
IGNITION ON <ON> mode.
1
Use the Remote Touch knob to select
the desired button on the screen.
2
To select the button on the screen, press
the Remote Touch knob. Once a button
has been selected, the screen will
change.
32
LS460_600h_Navi_U
When the pointer moves close to a button,
it will be automatically pulled onto that but-
ton. The strength of this pull can be
adjusted. (P. 57)
The pointer will disappear from the screen
if it is not moved for 6 seconds. Operation
of the Remote Touch knob will cause the
pointer to reappear.
" " and " " buttons on the Remote Touch
can be used to scroll up and down on list
screens.
With navigation function: Press the " " but-
ton on the Remote Touch to zoom in on the
map screen and the " " button to zoom
out.
When
is displayed on the screen,
select
to return to the previous
screen.
Press the "MENU" button on the Remote
Touch to display the "Menu" screen. (P.
14)
Without navigation function: The compass
screen can be displayed by pressing the
button on the Remote Touch.
With navigation function: The map screen
can be displayed by pressing the "MAP/
VOICE" button on the Remote Touch.
(P. 77)