Pride JAZZY Manual page 18

V I I . C A R E A N D M A I N T E N A N C E
Follow these easy steps for a quick and safe repair for
both pneumatic and solid tires:
1. Turn off the power to the controller.
2. Make sure that the power chair is in drive mode. See
figure 8.
3. Raise and support the power base so that the wheel is
at least 1 in. (2.5 cm) off of the ground.
4. Remove the drive wheel nut and washer from the axle.
See figure 21.
5. Remove the drive wheel from the axle. Make sure that
you keep the key.
6. Replace the entire assembly.
7. Slide the wheel back onto the axle. Make sure that the
key is in the axle slot.
WARNING! Failure to ensure that the axle
key is properly installed into the axle slot
when mounting the wheel can result in
electronic brake failure, personal injury,
and/or product damage.
8. Reinstall the drive wheel nut and washer onto the axle and tighten. See figure 21.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your authorized Pride Provider.
WARNING! Make sure both the nut and the washer are reinstalled and tightened properly.
9. Remove the power chair from the base support.
Battery Replacement
A battery wiring diagram is printed on a decal located on the power base. See VI. "Batteries and Charging" for
correct battery specifications.
MANDATORY! Battery posts, terminals, and related accessories contain lead and
lead compounds. Wear goggles and gloves when handling batteries and wash hands
after handling.
WARNING! The batteries in your power chair should only be serviced or replaced by
an authorized Pride Provider or a qualified technician.
WARNING! Do not replace batteries when seat is occupied.
WARNING! Power chair batteries are heavy. See specifications table. If you are
unable to lift that much weight, be sure to get help. Use proper lifting techniques and
avoid lifting beyond your capacity.
WARNING! Do not mix old and new batteries. Always replace both batteries at the
same time.
PROHIBITED! Keep tools and other metal objects away from the battery terminals.
Contact with tools can cause electrical shock.
You may need the following to change your batteries:
metric/standard socket set and ratchet
adjustable wrench
Jazzy Select Elite
MOTOR KEY
AXLE
DRIVE WHEEL WASHER
Figure 21. Jazzy Select Elite Drive Wheel Removal
www.pridemobility.com
DRIVE
WHEEL
MAIN SHROUD
DRIVE WHEEL NUT
REAR
BATTERY
Figure 22. Battery Installation (Seat Removed for Clarity)
35 36
V I I . C A R E A N D M A I N T E N A N C E
FRONT
BATTERY
www.pridemobility.com
CORRECT
CONNECTION
INCORRECT
CONNECTION
FRONT COVER
Jazzy Select Elite