Crop To Pixel Addresses - Symbol DS6707 Product Reference Manual

5 - 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide

Crop to Pixel Addresses

Parameter # F4h, F0h, 3Bh (Top)
Parameter # F4h, F0h, 3Ch (Left)
Parameter # F4h, F0h, 3Dh (Bottom)
Parameter # F4h, F0h, 3Eh (Right)
If you selected Enable Image Cropping, set the pixel addresses from (0,0) to (1279,1023) to crop to.
Columns are numbered from 0 to 1279, rows from 0 to 1023. Specify four values for Top, Left, Bottom, and Right,
where Top and Bottom correspond to row pixel addresses, and Left and Right correspond to column pixel
addresses. For example, for a 4 row x 8 column image in the extreme bottom-right section of the image set the
following values:
Top = 1020, Bottom = 1023, Left = 1272, Right = 1279
To set the crop to pixel address, scan each pixel address bar code below followed by four numeric bar codes
representing the value. Leading zeros are required. For example, to crop the top pixel address to 3, scan 0, 0, 0, 3.
See Appendix D, Numeric Bar Codes
Top Pixel Address
(0 - 1023 Decimal)
Bottom Pixel Address
(0 - 1023 Decimal)
for numeric bar codes.
Left Pixel Address
(0 - 1279 Decimal)
Right Pixel Address
(0 - 1279 Decimal)