Motorola QIP2500 Series User Manual page 27

There is no
video on the TV
screen
Verify that the TV is powered on and set to the
appropriate input source for the set-top.
Verify that the set-top is powered on and tuned to an
authorized digital TV channel.
Verify that all video cables between the set-top and
the TV are firmly connected (hand tighten if necessary).
Verify that the coaxial cable feed is firmly connected to the
set-top and the wall jack.
If the set-top video output is connected to a home
theater/digital receiver, verify that the receiver is powered
on and set to the appropriate input source.
If you are watching TV using your VCR, be sure your VCR
is on.
QIP2500 User Guide
21