2.3.19. The order of tightening screw of Each Unit
After servicing, tighten the screwsin the following sequence.
1. Tightening the screws of the LCD Unit.
1-1.Tighten DXYN3+J5FNL(J). No.1, No.2
1-2.Tighten XTB26+10GFN(H). No.3, No.4
Screw (H)
Screw (H)
2. Tightening the screwsof the Bottom Case Ass'y
After holding down area (A):
2-1.Tighten DXHM0039ZA(B). No.5-No.10
2-2.Tighten DXHM0057ZA(D). No.11-No.13
2-3.Tighten DFHE5025XA(C). No.14
2-4.Tighten DXHM0057ZA(D). No.15-No.16
Keeo the SIde Cover pressed
toward the inside and back
while tightening the screws
Screw (J)
Screw (J)
Screw (B)
Screw (D)
Screw (D)
Keep the Side Cover pressed toward the
inside and back while tightening the screws
2-21
Screw (D)
Screw (B)
Screw (B)
A
Screw (C)
Screw (B)
Screw (B)
Screw (B)
Screw (D)
Screw (D)