Audio Connection; Connecting A Microphone; Understanding The Control Functions; Power And Playback Functions - Karaoke Night KN275 User Manual

 In the setup menu for configuring the TV there may be an 'Input Selection' option
where you may choose between 'Cable/Ant.', 'Video 1', or 'Video 2' etc. as the input
source.
 Try looking for a 'Video' channel between the highest channel and the lowest channel
on your TV (i.e. between 2 and 99 may be 'VIDEO' or 'INPUT').
 Look for buttons on the remote control for the TV you are connecting to that say
'VIDEO', 'VIDEO 1', 'AUX', 'EXT', 'LINE 1. The 'LINE-IN' button will display the Video
input source.

Audio connection

Connect the unit to your TV or home stereo system using the White and Red connections on
the supplied patch cord. Plug the white end of the patch cord into the white AUDIO OUT jack
on the unit. Plug the red end of the patch cord into the red AUDIO OUT jack on unit. Now
connect the other end of the cable's white (left channel) and red (right channel) plugs to your
TV or home stereo system's 'AUDIO IN' or 'AUX IN' jacks.

CONNECTING A MICROPHONE

1. Plug a microphone (one microphone is included) into the MIC 1 or MIC 2 JACK on the
lower left side of your unit. The mic output will be mixed with an audio source from
CD/CD+G/USB flash drive.
2. Slide ON/OFF switch on microphone to "ON" before singing and always slide to "OFF" after
use.
CAUTION - Tapping or dropping the microphone while it is on can cause permanent damage
to it. Never grip and swing the microphone around by the connecting cord.

UNDERSTANDING THE CONTROL FUNCTIONS

 POWER AND PLAYBACK FUNCTIONS
1. FUNCTION SELECTOR (CDG/USB)
 Slide the CD/USB FUNCTION switch to CD position to playback a CD, MP3, CD+G,
CD-R/CD-RW disc.
 Slide the CD/USB FUNCTION switch to USB position to playback MP3 files on a USB
flash drive.
 Once the AUX IN JACK is plugged into, the KN275 will automatically enter the AUX
mode. You can attach other music sources (iPod, MP3 or other digital audio players)
through the AUX IN JACK to your external player's audio out jack or headphone jack.
2. DANCING WATER ON/OFF
Set it to "ON" to turn ON the dancing water LED show.
Set it to "OFF" to turn dancing water LED show OFF.
3. POWER ON/OFF BUTTON.
Press this button to turn unit ON.
Press and hold this button to turn unit OFF.
4. PLAY/PAUSE
Tap once to play a selected song when playing a CD/CD+G/CD-R/CD-RW disc or MP3
files on a USB flash drive. The PLAY/PAUSE INDICATOR will light.
While playing, tap again to pause. The PLAY/PAUSE INDICATOR will flash.
BUTTON
8