Stop Button; Repeat Function; Program Function; Next  Button - Karaoke Night KN275 User Manual

5. STOP  BUTTON
While a selected song is playing, tap this to stop.
6. NEXT  BUTTON
Tap once to skip forward to the following song during playback or stop mode.
7. PREV  BUTTON
Tap once to skip back to the start of the current song during playback or skip back to the
previous song during stop mode.
8. REPEAT/PROGRAM BUTTON

REPEAT function

During CD/CD+G/MP3 playback on CD/CD-R/CD-RW/USB Flash Drive
 tap once for Repeat 1 (REPEAT INDICATOR in LED DISPLAY will flash) to playback
current song only;
 tap again for Repeat All (REPEAT INDICATOR will light steadily) to repeat all
available tracks on the disc;
 tap again to cancel Repeat mode (REPEAT INDICATOR will be OFF).

PROGRAM function

This function allows music tracks to be played in a programmed sequence.
NOTE: Program function can only be set in STOP mode.
1. Press the PROGRAM button once. Program Number 01 will display and PROGRAM
INDICATOR will flash.
2. Press the SKIP FORWARD or SKIP BACKWARD button to select the track to be
programmed.
3. Press the PROGRAM button again to store the selection. The Program number. will
advance to 02 to prompt for the next input.
4. You may repeat steps #2 to #3 to program up to 20 tracks. As soon as you have
entered the 20
full.
5. Press the PLAY button to complete and start program play. Press STOP button to
stop program play.
6. You may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all
tracks (Repeat All) in the Program Play Mode.
7. The CD player will stop when all the programmed tracks have been played through
once. To repeat program play, press the PLAY/PAUSE button.
8. To cancel program play, press the STOP button twice while program play is running
or open the CD DOOR in stop mode.
Up to 20 tracks can be programmed. If you attempt to program more than 20 tracks,
"FU" will appear in the LED DISPLAY and "PROG FULL" will appear on the TV screen
as shown below (if connected).
th
track, the LCD DISPLAY will show "FU", indicating that program is
9