Battery Details - WowWee ROBORAPTOR X User Manual

b R :
aTTERy EquIREMENTs
Your Roboraptor X™ is powered by 6 x "AA" size batteries (not included).
Your Remote Controller is powered by 3 x "AAA" size batteries (not included).
Your Infra-red Dongle is powered by 3 x "LR44" batteries (included).
b I :
aTTERy NsTallaTION
1. Before installing or changing batteries, ensure the Roboraptor X™'s ON/OFF button
is in the OFF position.
2. Remove the battery compartment covers using a Phillips or crosshead screwdriver
(not included).
3. Insert batteries (not included) into the Roboraptor X™ and controller as shown in
the diagrams.
4. Replace the battery compartment covers and the screws.
a : I b
TTENTION MpORTaNT
• Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries (Standard (Carbon zinc),
alkaline, or rechargeable), or rechargeable batteries of different capacities.
• Remove rechargeable batteries from the toy before recharging them.
• Rechargeable batteries are only to be charged under adult supervision.
• Please respect the correct polarity, (+) and (-).
• Do not try to charge non-rechargeable batteries.
• Do not dipose of batteries into fire.
• Replace all batteries of the same type/brand at the same time.
• The supply terminals are not to be short-circuited.
• Remove exhausted batteries from the toy.
• Batteries should be replaced by adults because of small parts.
• Remove batteries if the toy is not going to be played with for some time.
• The packaging has to be kept since it contains important information.
I
aTTERy NFORMaTION

BATTERY DETAILS

OF ThE
I - d
NFRa REd ONglE
OF ThE
1.5V LR6 UM3 "AA" 1.5V LR6 UM3 "AA"
1.5V LR6 UM3 "AA" 1.5V LR6 UM3 "AA"
1.5V LR6 UM3 "AA" 1.5V LR6 UM3 "AA"
b V
OTTOM IEw
R X™
ObORapTOR
1.5V LR03 1.5V LR03
UM4 "AAA" UM4 "AAA"
1.5V LR03
UM4 "AAA"
b V
aCk IEw
R C
EMOTE ONTROllER
4