Table of Contents
Advertisement
• Clean the device if necessary.
See Cleaning.
• Put the device and all demounted elements in one carton and carry and store them according to
the requirements in the technical specifications. See Technical specifications.
9.
Solve problems
Problem
Device is switched on,
but has no function
Lamps do not light up
10. Maintenance
10.1 Continuous inspections
What you should do?
Check all cables and plugs for damages
In case of damage:
WARNING! Danger of electric shock
and fire through short-circuit. The device
should be repaired by an electrician
immediately
Check, if the socket of the lamps is firmly
In case of damage:
WARNING! Danger of electric shock
and fire through short-circuit. The device
should be repaired by an electrician
immediately
10.2 Cleaning
WARNING
Danger of cutting and splitting through breaking or bursting lamps.
WARNING
Danger of electric shock
− The contact with moisture or water should be avoided.
− Unplug the power cord before cleaning the device.
ADVICE: Just use the following specified cleaning supplies.
Possible reason
Power cord is not
plugged or plugged
incorrect
Micro-fuse is defect
Lamps are switched
off
Lamps are defect
Before every operation
Remedy
Plug in the power cord correctly
Change micro-fuse, see Change micro-
fuse
Switch on lamps, see Switch lamps on
and off
Change lamps, but only through an
electrician
X
9
Advertisement
Table of Contents
