Table of Contents
Advertisement
Restore
1.
Connect an external USB hard drive containing the Qsonix backup, to the back of the Qsonix system.
2.
Tap the Tools icon on the Main screen.
3.
Tap Restore. "Restore Drive Found" will then be displayed. Tap Next.
4.
Once you have confirmed the restore set is correct, tap Next.
5.
Tap Start Restore.
DO Not Turn the power off until the process is completed.
6.
System Maitenance and Automatic Internet Updates
Version 2.0 includes an automatic Internet update system that will automatically download and install future Qsonix updates, enhancements
and upgrades directly from Qsonix. Your Q100 system and experience will just get better and better. System maintenance also takes
place automatically during periods of inactivity or may be initiated from the System Menu located in the Tool Box. During the maintenance
cycle, any downloaded updates with be installed. To confirm what firmware version is installed, go to the Information tab.
Other Tasks performed during the maintenance cycle:
• Disk Space and Conversion Optimization
• Format conversion and transcoding (iPod and Full Library compression support)
• Volume Leveling
• Library Maintenance
• Software Updates
NOTE: The maintenance cycle has a timeout of 1 hour, meaning that these maintenance tasks will commence after 1-hour of inactivity on
the system. You may interrupt maintenance at ANY time and the system will automatically resume when it can. These tasks are designed
to be completely automatic and require no input or action on your part.
27
Advertisement
Table of Contents
