Table of Contents
Advertisement
Setting up a Network Place
To set up a Network Place, you will need to know the network path of the file(s) you wish to access on the other device. You may also be prompted
for your User Name and Password during the authentication phase of the set up.
NOTE- A USB keyboard may be plugged into the Q100 for easy data entry during setup.
1.
Tap the Tools icon on the main screen.
2.
Select the Network tab in the upper part of the screen.
3.
Select the Network Places tab.
4.
Press the Add New button.
5.
You are then prompted to "Add Network Place." There are two fields to fill out: Friendly Name and Network Path. (Figure 6)
•
Friendly Name can be named for quick reference. Type in a Network Place name that will meaningfully identify the destination for
you. For example, "Mike's Latin Jazz Collection," or "Julie's MP3s".
•
Network Path should be the exact location of where the files to be added exist. Similar to a "directory path" on your PC, this is
where Qsonix is pointed to collect the music to copy. The Network Path begins with a double backward slash (\\). Be sure to type
in the address exactly.
Examples:
\\machinename\sharename
\\ipaddress\sharename
\\192.168.0.100\music
\\myserver\albumcovers
\\mypc\photos
6.
Once these fields have been filled out, there is the option to Test Connection or Save. Test Connection confirms the connection of the
Network Path. Save continues without confirming the connection of the Network Path.
10
Advertisement
Table of Contents
