Table of Contents
Advertisement
Photo Screensaver
The Qsonix screensaver now allows you to specify any network location as the source of images to be displayed while the screensaver is active.
Display family photos or any customized imagery you desire. There is the option of specifying one of three styles- Playback Info (shows Now
Playing), Black Screen (displays blank, black screen) and Custom Photos (displays photos.) You may also enable or disable the screensaver and
specify the activation "timeout" using these controls. (Figure 15.)
NOTE- The photo style requires further configuration, including the network location of the photos and the duration for each slide to remain
onscreen. See "Setting up a Network Place" for help.
To Set Screen Saver
1.
Tap the Tools icon on the Main screen.
2.
From the System tab tap Screen Saver tab.
3.
Tap Enable Screensaver.
4.
Scroll through the Activation timeout open to select the inactivity time
that will trigger the Screen Saver.
5.
Select Screen Saver style: Now Playing mode, Blank or Picture mode.
6.
Tap Done.
To Configure the Picture Mode
1.
Tap the Configure button under the Picture mode selector.
2.
Scroll to Show Images to select desired picture view time.
3.
Scroll through Network Place, to select the network place containing
the pictures.
4.
Check Include Sub Folders if your pictures are stored in sub folders.
5.
Tap Done.
Figure 15- Screen Saver Settings
22
Advertisement
Table of Contents
