Table of Contents
Advertisement
6.
When you are satisfied with your selections and track order, simply insert a blank recordable disc into the drive. Once a disc is inserted,
the Green Start button will then be activated. Simply press this to begin recording.
NOTE- A graphic depiction of required disk space for a list will show up on the screen, along with the total and selected number of
tracks and the respective playback time. If the list of tracks exceeds disk space, it will be indicated next to the track title.
7.
Once recording begins, the Q100 first prepares the tracks for recording which can take a few minutes, depending on the compression
of the chosen tracks. Progress can be monitored via the screen.
8.
Writing to the disc begins automatically after the Q100 has prepared the tracks. When the write/record process is complete, the CD
tray will open. All you need to do is label your new disc and play it in any CD player!
9.
If you change your mind, you may cancel the recording any time.
Figure 12- Selected tracks for CD burning
18
Advertisement
Table of Contents
