Table of Contents
Advertisement
STEP 3 (See Diagram 3)
A.) Attach the Leg Developer (#7) to the Front Leg (#5). Secure it with one M8 x 3 1/8"
Allen Bolt (#36), two Ø 5/8" Washers (#40), and one M8 Aircraft Nut (#44).
B.) Insert two Foam Tubes (#11) halfway through the holes on the Leg Developer. Push
four Foam Rolls (#28) onto the Tubes from both sides.
C.) Attach a Spring Clip (#19) to the weight post on Leg Developer.
7
DIAGRAM 3
Advertisement
Table of Contents
