Table of Contents
Advertisement
STEP 6 (See Diagram 6)
A.) Attach one Butterfly (#8) to the pivot on Left Upright Beam (#2). Secure
it with one M10 x 5 7/8" Hex Bolt (#37), two Ø ¾" Washers (#39), one
M10 Hex Nut (#51)and one M10 Butterfly Lock Knob (#50). Do not over
tighten the Knob. Make sure the Butterfly is able to move freely.
B.) Insert a Butterfly Handle (#13) through the opening on the Butterfly arm
from front. Secure the Handle with one M10 x 5/8" Allen Bolt (#47) and
one Ø ¾" Large Washer (#48). Attach a Spring Clip (#19) to the weight
post on the Butterfly.
C.) Repeat Procedure A and B to install the other Butterfly to Right Upright
Beam (#1).
10
DIAGRAM 6
Advertisement
Table of Contents
