Advertisement
Setting Vibrate Mode
1. Slide the button to the M (Mute) position to select vibrate mode. When in vibrate
mode, the pager will vibrate for 2 seconds. No alert tone will be heard when a page is
received.
Setting Date and Time
1. Slide the button to M position.
2. Press and hold the button for 2 seconds. The pager displays: 12 HOUR or 24 HOUR
3. Slide the button to the N position or return it to M position to choose 12 hour or 24
hour mode.
4. After choosing 12 hour or 24 hour mode, press the button again to set time and date.
Slide the button to the N position to choose the number which you want to change (the
number you choose will flash), then press the button to enter the number.
5. Slide the button between N and M position to shift the cursor.
6. To return to standby mode at any time during the date and time setting procedure,
allow the pager to time-out for 8 seconds.
Message Management
Viewing messages
1. When a page is received, press and release the button to display the message.
2. Messages longer than 12 digits will continue on a second screen. This is indicated by
the icon in the lower right corner of the display.
3. The icon is displayed if there are any unread messages.
4. When a message is received without numeric data, the pager displays: TONE ONLY
5. The number of unread messages and time received are indicated on the display.
6. Up to sixteen 20-digit messages can be stored in the pager. To read other messages,
continue pressing the button to scroll through the messages.
Deleting a single message
1. Display the message to be deleted by pressing the button for 2 seconds.
2. Press and hold the button until the pager displays: DEL
3. Release the button. The pager displays the next message. If there are no more
messages, the pager displays: NO PAGE
Deleting all messages
1. In standby mode, press and hold the button until the pager displays: DEL ALL
2. Release the button. This deletes all messages except unread messages.
3. The pager resumes standby mode.
When pager memory is full
When there are 16 messages in memory, the pager displays: FULL
If this happens, an incoming message deletes the first (oldest) message (read or unread)
from memory. After you scroll through all of your messages, the standby screen is
displayed.
Advertisement
