Panasonic CS-KS30NKU Technical & Service Manual page 69

2. How to set the OFF time
(Example) To stop the air conditioner at 11:00 am.
Operation
1.
Press the OFF TIME setting
button once.
2.
Press the Advance, Return
( , ) button until AM 11:00
is displayed.
3.
Wait a few seconds, and then
the setting is complete.
3. How to set the ON time
(Example) To start operation at 7:10 am.
Operation
1.
Press the ON TIME setting
button once.
2.
Press the Advance, Return
( , ) button until AM 7:10
is displayed.
3.
Wait a few seconds, and then
the setting is complete.
Indication
The timer indication is
displayed, and the present OFF
time is shown.
The timer indication
blinks.
The time can be set in 10-minute
increments. Holding down the
button advances the time rapidly
in 10-minute increments.
The timer indication
stops blinking and the present
time is displayed.
Indication
The timer indication is
displayed, and the present ON
time is shown.
The timer indication
blinks.
The time can be set in 10-minute
increments. Holding down the
button advances the time rapidly
in 10-minute increments.
The timer indication
stops blinking and the present
time is displayed.
4. How to set daily ON/OFF repeat timer
(Example) To start operation at 7:10 am. and stop the air conditioner
at 11:00 am.
10:30 pm. 7:10 am.
Present time
ON
Operation
1.
Set the timer ON/OFF times
as shown in 2-1, 2, 3 and 3-1,
2, 3.
NOTE
• The ON/OFF combination timer uses the current time as the
reference, and it is activated starting from whichever set time
comes first.
• With the ON/OFF combination timer, the settings are repeated
every day.
• You can check the timer ON/OFF times after you have set them by
pressing the ON TIME and OFF TIME setting buttons.
To cancel a timer program
• Press the CANCEL button.
• When either an ON or OFF timer is to be canceled, press the
button corresponding to the timer whose program is to be
canceled, and then press the CANCEL button.
NOTE
• The airflow direction, fan speed and temperature setting can be
changed after a timer program has been set even when the unit is
stopped. Even when operation is stopped during an ON timer
program, the unit will start operating when the set time is reached
provided that the program is not canceled.
• When the ON timer and OFF timer are set to the same time, the
timer operates as if it is turned off.
11:00 am.
OFF
Indication
The present time 10:30 pm. and
are displayed.
13