Panasonic KX-TG7861NZ Operating Instructions Manual page 28

Programming
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
R You must store the phone number with an
area code in the call barred list.
n From the caller list:
1
MCN ( )
2
MbN: Select the entry to be barred. a
M N a M N
3
MbN: "Save CID" a MOKN
4
MbN: "Caller Barred" a MOKN
5
MbN: "Yes" a MOKN a MeN
n By entering phone numbers:
1
M N (right soft key) #217 a
M N
2
Enter the phone number (24 digits
max.). a MOKN
R To erase a digit, press MCN.
3
MeN
Viewing/editing/erasing bar call
numbers
1
M N (right soft key) #217
2
MbN: Select the desired entry.
R To exit, press MeN.
3
To edit a number:
M N a Edit the phone number. a
MOKN a MeN
To erase a number:
M N a MbN: "Yes" a MOKN a MeN
Note:
R When editing, press the desired dial key to
add, MCN to erase.
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 31) will
include area codes. If you do not want to dial
the area code when making calls from the
28
TG7861_62NZ(en)_0121_ver003.pdf
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
"09". If you make a call from the caller list to
the phone number "09-456-7890", the unit
dials "456-7890".
1
M
2
Enter an area code (5 digits max.). a
MOKN a MeN
Note:
R The use of this feature can prevent a
National Call from being dialled. E.g., in the
case of the South Island, the "03" will be
omitted and will therefore prevent a
National Call to other areas of the South
Island.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M
2
Enter the base unit PIN (default: "0000").
R If you forget your PIN, contact an
3
Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
R " " is displayed next to the selected
R To cancel a selected handset, press
4
MOKN
5
Select a memory location by pressing 1
to 6. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MeN
R To erase a restricted number, press
28
N (right soft key) #255
N (right soft key) #256
authorised service centre.
are displayed.
handset numbers.
the same dial key again. " "
disappears.
MCN.
2013/01/21 9:48:16