Table of Contents
Advertisement
Operations
Transporting cleaner
1. To move your cleaner from room to room, put
the handle in the upright position, tilt the cleaner
back on its rear wheels and push forward.
2. The cleaner can also be moved by using the
carrying handle.
Special tools
Your BISSELL CleanView vacuum is not only a
powerful carpet and rug vacuum cleaner, it's also
a versatile above floor vacuum cleaner when you
select one of the special tools.
1. Raise handle to upright position.
2. Grasp the hose wand and separate from the
hose wand base.
3. Attach tools by firmly pushing onto vacuum
hose or extension wand.
a. Crevice tool Use in tight narrow spaces.
b. Dusting Brush Use brush to dust
furniture, blinds, books, lamps, shelves
and baseboards.
c. Extension wand Use with desired
attachment for a longer reach.
d. TurboBrush™ Tool Use rotating brush
action for small flat areas such as stairs and
cushions. Press gently down and pull toward
you in a raking motion; too much pressure
will cause the brush to stop rotating.
e. Hard Floor Tool An optional clip
attachement to the soleplate has been
included with your PowerTrak™ vacuum.
Attach to the soleplate for maximum pickup
on hard floors.
www.BISSELL.com
8
NOTICE
The floor brush will continue to rotate while you use your
vacuum for above floor cleaning. To prevent carpet damage,
do not lean on the vacuum or let the powerfoot tilt forward.
a.
b.
d.
» The crevice tool is located
inside the wand
e.
WARNING
The rotating floor brush continues to rotate while tools
are in use. To reduce the risk of injury from moving parts,
always move the cleaner with the carrying handle at the
back of the cleaner. Always place vacuum cleaner on floor
with handle in upright position when using tools. Never
place your fingers under the cleaner when it is running.
Never place powerfoot on furniture or uneven surfaces. Do
not place vacuum cleaner close enough to objects to pull
them into rotating brush.
NOTICE
While vacuuming, certain carpets and low humidity
conditions may generate small static discharges. The
discharges are entirely harmless and are not associated
in any way with the main power supply.
c.
Tip
Advertisement
Table of Contents
