Control Panel - Firmware Update - Motorola WR850G User Manual

CONFIGURATION
Field
Login User ID
Login Password
Login Password
Confirm
WAN Web Login
WAN Web Login
Port
Login Idle Time
WAN Ping
Response

Control Panel - Firmware Update

This screen enables you to update the firmware (router's hardware
control mechanism). Listed on this screen is the current version of
the Model Number, Serial Number, and Firmware Number; enabling
you to verify that you are running the most current version.
Access this website
www.motorola.com/broadband/networking
for a firmware update.
SECTION 3, CONFIGURATION
Description
Changes the User ID used for logging into
the router's web-based utility. It cannot be
longer than 63 bytes. A blank user name is
not allowed. The default is "admin".
Use this option to change the Password,
used to log into the router's web based utility.
It cannot be longer than 63 bytes. A blank
password is not allowed. The default is
"motorola".
Re-enter the same Login Password.
This enables you to log into the router from
the Internet.
Click to enable. The default is disabled.
Enables you to specify different ports on the
router to allow remote login. The default is
8080.
The amount of idle time (no actions occur)
that elapses before the router automatically
logs off the user. The default is 10 minutes.
Enables a remote user to ping the router.
Select to enable WAN Ping response. The
default is disabled.
SECTION 3
to check
3-39