Motorola WE800G User Manual page 58

Section 3
3-20
Field
Connection Mode
Connection Status
IP Address
Subnet Mask
Gateway IP
Apply
Cancel
Description
Select a connection mode.
The options are DHCP or Static Assigned.
If you select Static Assigned, you must enter
in the IP Address, Subnet Mask, and
Gateway IP information below.
Provides current information about the
Ethernet connection status of the Wireless
Ethernet Bridge.
This is the IP address you use to connect to
the WE800G. If connecting to a DHCP
server, the IP address will appear here. If
using Static Assignment, enter the IP address
here.
This is the Subnet Mask address you use to
connect to the unit. If connecting to a DHCP
server, the Subnet Mask address will appear
here. If using Static Assignment, enter the
Subnet Mask address here.
This is the Gateway IP address the device
will use to connect back to you. If connecting
to a DHCP server, the Gateway IP address
will appear here. If using Static Assignment,
enter the Gateway IP address here.
Click to save your settings.
Click to cancel any changes.
Configuration
WE800G