Section 2
2-2
Antenna Installation
When shipped, the antenna is already connected to the WE800G. If,
for some reason, you have to detach and than re-attach the antenna
to the WE800G:
1
Locate the antenna connection on the back of the Wireless
Ethernet Bridge (the threaded knob).
2
Screw the antenna connector (counter-clockwise to remove,
clockwise to attach) on to the threaded knob until removed or
firmly seated. When attaching, do not over-tighten.
Wireless Ethernet Bridge Physical Installation
You can install the Wireless Ethernet Bridge horizontally or vertically.
The Wireless Ethernet Bridge can also be mounted on a wall. Your
own needs determine the best placement.
Installation
WE800G