Table of Contents
Advertisement
Flash
Changing the Flash Mode
You can change the flash mode to match the shooting scene. For details
on the flash range, see "Camera" ( = 177).
1
Raise the flash.
●
Move the [ ] switch.
2
Configure the setting.
●
Press the [ ] button, choose a flash
mode (either press the [ ][ ] buttons or
turn the [ ] dial), and then press the [ ]
button.
●
The option you configured is now
displayed.
●
The setting screen cannot be accessed by pressing the [ ] button
when the flash is lowered. Move the [ ] switch to raise the flash,
then configure the setting.
Auto
Fires automatically in low-light conditions.
On
Fires for each shot.
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
Still Images
Movies
For shooting without the flash.
Slow Synchro
●
In [
] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera ( = 83).
●
In [
] mode, even after the flash fires, ensure that the main
subject does not move until the shutter sound is finished playing.
Off
●
A blinking [
] icon may be displayed when you press the shutter
button halfway in camera-shake inducing, low-light conditions. In
this case, mount the camera on a tripod or take other measures
to keep it still.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
81
Advertisement
Table of Contents
