GMC Yukon 2015 Owner's Manual page 75

3-6 Seats and Restraints
Storing Memory Positions
To store positions to the 1 and 2
buttons:
1. Adjust the driver seat, outside
mirrors, power tilt and
telescoping steering column (if
equipped), and adjustable
pedals (if equipped) to the
desired driving positions.
2. Press and release SET. A beep
will sound.
3. Immediately press and hold 1
until two beeps sound.
4. Repeat Steps 1 3 for a second
driver using 2.
To store positions to the
button and easy exit features:
1. Adjust the driver seat, power tilt
and telescoping steering column
(if equipped), adjustable pedals
(if equipped), and outside
mirrors on some vehicles to the
desired positions for getting out
of the vehicle.
2. Press and release SET. A beep
will sound.
3. Immediately press and hold
until two beeps sound.
Manually Recalling Memory
Positions
If the vehicle is off or not in P (Park),
press and hold "1," "2," or
to manually recall the previously
stored memory positions. Releasing
"1, "2," or
positions are reached stops the
recall.
If the vehicle is on and in P (Park),
press and release 1, 2, or
(Exit)
manually recall the previously
stored memory positions. Placing
the ignition in OFF/LOCK before the
stored positions are reached stops
the recall.
Automatically Recalling Memory
Positions (Auto Memory Recall)
Auto Memory Recall must be
enabled in the personalization menu
for the automatic recall feature to
(Exit)
before the stored
to
work. This selection may be found
under Settings, Comfort and
Convenience, Auto Memory Recalls.
The Auto (Automatic) Memory
Recall feature automatically recalls
the current driver s previously stored
1 or 2 position when entering the
vehicle.
If the Auto Memory Recall feature is
enabled in the vehicle
personalization menu, memory 1
or 2 positions are recalled in the
following ways:
Press on the RKE transmitter
and open the driver door.
Press on the RKE transmitter
when the driver door is open.
If equipped with Keyless Access,
press the lock/unlock button on
the outside driver door handle
and open the driver door. The
RKE transmitter must be present
for the recall to activate.
See Vehicle Personalization on
page 5-43.