Control Panel - Siemens Extraklasse 1300 Instruction Manual And Installation Instructions

Control panel

Delay Start" button.
(if required)
The time can be delayed by hours up to
a maximum of 19h".
Finish In" display,
if the programme is selected,
Delay Start" display,
if the Delay Start" is additionally selected.
The point between the digit and h" flas
hes until the Delay Start" has elapsed.
The selected programme then starts auto
matically and the Finish In" time is
displayed.
Programme selector
For switching the machine on and off
and for selecting the programme.
Can be rotated in either direction.
The programme selector does not rotate
while the programme is running the
programme sequence is electronically
controlled.
Indicator light
Ready" is on, if the programme is selected,
Wash", Rinse", and Spin" light up if the Start" button is
pressed and the respective programme segment runs.
Indicator lights flash: Operation error.
8
Buttons for additional options
(in addition to the programme if required)
Short Wash":
Extra Rinse":
Less Ironing":
Combination of additional options is possible
before starting a programme.
The indicator lights of the buttons come on,
if the additional options are active.
Switch off additional option: press button again.
Spin speed selector
(if required)
For stepless setting of the spin speed;
must click in place at No Final Spin".
Start" button.
For starting the wash cycle (programme must
have been selected).
Reduced programme
duration.
Extra rinse cycle
creases are reduced.