Kenwood NX-5200 User Manual page 8

Vhf, uhf and 700/800mhz digital transceiver
Hide thumbs Also See for NX-5200:
Table of Contents

Advertisement

Available languages

Available languages

WARNING
   
Turn the transceiver power off in the following locations:
Near explosives or blasting sites.
In aircraft. (Any use of the transceiver must follow the instructions
and regulations provided by the airline crew.)
Where restrictions or warnings are posted regarding the use of
radio devices, including but not limited to medical facilities.
Near persons using pacemakers.
Turn the transceiver power off in the following locations, unless
the model is specifically qualified for such use (Intrinsically Safe
such as approved by Factory Mutual, CSA):
In explosive atmospheres (inflammable gas, dust particles, metallic
powders, grain powders, etc.).
While taking on fuel or while parked at gasoline service stations.
WARNING
   
Do not remove the black sheet from the reverse side of the
transceiver (refer to the illustration below). Removal of this sheet
decreases the waterproof efficiency of the transceiver and may
cause malfunctions if water seeps into the transceiver.
The orange seal on the reverse side of the transceiver is important
with respect to the waterproof efficiency of the transceiver. Do not
place stickers or other materials on or around the seal shown in the
figure, or on the reverse side of the battery pack. Doing so will impair
the waterproof efficiency of the transceiver and may cause it to
break down. Additionally, in order to prevent damage to the seal,
do not allow it to come in contact with foreign materials.
6
 
 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-5300Nx-5400

Table of Contents