Table of Contents
Advertisement
Section 3
4
The Wireless Network Properties window displays with the current settings:
5
If the network requires Network Authentication, select the type of authentication
required. WPA and CCX might require further Authentication options found on the
Authentication tab. Match the setting used by the network.
6
If the network requires Data Encryption, select the type of encryption required. Match
the setting used by the network.
7
If using WPA-PSK, enter the Pass Phrase in the Network key field.
–
In the example above, the network is configured for WPA-PSK for Authentication
and TKIP for Encryption.
8
For additional information about the fields on this window, refer to
Wireless
Network.
9
Click OK to save your changes.
3-10
Configuration
Configuring a New
WN825
Advertisement
Table of Contents
