Mazda 2010 Mazda6 Manual page 440

Maintenance and Care
Owner Maintenance
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
NOTE
To replace the bulb, contact an Authorized
Mazda Dealer.
Reverse lights
1. Pull the center section of the plastic
retainer and remove the retainers, then
partially peel back the trunk rear trim.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
8-44
Removal
Installation
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
License plate lights
1. Pull the center section of the plastic
retainer and remove the retainers, then
partially peel back the trunk rear trim.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
Removal
Installation