Mazda 2010 Mazda6 Manual page 18

Essential Safety Equipment
Seats
NOTE
In the following cases, the seat position set
function cancels:
Any of the seat adjustment switches are
l
operated.
The set switch is pressed.
l
The vehicle starts moving.
l
Operation using the advanced key/
retractable type key
With advanced key
Lock button
With retractable type key
Lock button
Operation
indicator light
Programming
One seat position can be programmed into
each advanced key/retractable type key.
2-8
Unlock button
Unlock button
After the following conditions have been
met, operate the seat and the advanced
key/retractable type key to program the
seat positions.
The ignition switched off
l
(The auxiliary key/retractable type key
is removed from the ignition switch)
The driver's door is open
l
1. Adjust the seat to the desired position.
For each seat position adjustment
method, refer to the following pages:
Seat Slide (page 2-5)
Seat Recline (page 2-5)
Height Adjustment (page 2-6)
2. Press and hold the unlock button on the
advanced key/retractable type key
while pressing the set button until a
beep sound is heard.
The advanced key/retractable type key
is programmed after a beep sound is
heard.
Seat position activation
With the ignition switched off, unlock the
doors using any of the following methods
and open the driver's door within about 40
seconds to set the driver's seat to a pre-
programmed position.
Press the unlock switch on the
l
advanced key/retractable type key.
Touch the sensor area on the backside
l
of the front door handle while the
advanced key is being carried.