Troubleshooting - Sunbeam SWM6008-CN Instruction Leaflet

TROUBLE
• Power light not illuminated. ☛ Unit not plugged in.
• Refill/Reset light
illuminated.
• Mist output minimal to
none.
• Water leaks from tank.
• Crack in Tank.
• Film on tank.
T R O U B L E S H O O T I N G

TROUBLESHOOTING

PROBABLE CAUSE
☛ Water tank empty.
☛ Unit not reset after refill.
☛ Scale buildup on heating
element.
☛ Scale buildup on heating
element.
☛ Tank rubber ring is missing.
☛ Cap not tight enough.
☛ Tank water is hot.
☛ Hot water will cause tank to
pressurize.
☛ Tanks will crack if hit or dropped.
☛ Mineral deposits.
SOLUTION
✔ Plug in Unit.
✔ Refill tank.
✔ Follow manual for Reset Instructions.
✔ Remove scale from heating element.
✔ Remove scale from heating element.
✔ Remove tank cap and replace or
reposition ring.
✔ Tighten the cap.
✔ Fill with cool water only.
✔ Fill with cool water only.
✔ Handle tank with care.
✔ Clean/disinfect tank as instructed in
weekly cleaning instructions.