Selecting Conventional Constant Speed Control Mode - Toyota 2011 Sienna Owner's Manual

Selecting conventional constant speed control mode

Dynamic radar cruise control can be used as conventional cruise
control if you select constant speed control mode.
2-4. Using other driving systems
Press the "ON-OFF" button to
activate the cruise control.
Press the button again to deacti-
vate the cruise control.
Vehicles without a smart key sys-
tem:
Vehicle-to-vehicle distance con-
trol mode is always reset when
the engine switch is turned to the
"ON" position.
Vehicles with a smart key system:
Vehicle-to-vehicle distance con-
trol mode is always reset when
the "ENGINE START
switch is turned to IGNITION ON
mode.
Switch to constant speed con-
trol mode.
(Push the lever forward and
hold for approximately one
second.)
Cruise control indicator will come
on.
Adjusting the speed setting:
→P. 277
Canceling and
speed setting: →P. 279
STOP"
resuming the
281
2