Water Intake Fault; Water Drainage Fault - Miele HG06 Operating Instructions Manual

Frequently Asked Questions

Water intake fault

Problem
The Intake/Drain indica‐
tor flashes on and off.
The dishwasher stops
during a program.
The Intake/Drain indica‐
tor flashes.
Fault code  or  ap‐
pears in the display.

Water drainage fault

Problem
The dishwasher stops
during a program.
The Intake/Drain indica‐
tor flashes.
Fault code  shows in
the display.
56
Possible cause and solution
The water supply is turned off.
 Turn on the water supply all the way.
Before fixing the fault:
 Turn the dishwasher off with the  button.
There is a problem with the water intake.
 Turn on the water supply fully and start the pro‐
gram again.
 Clean the water intake filter (see "Frequently asked
questions").
 The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.
Possible cause and solution
Before fixing the fault:
 Turn the dishwasher off with the  button.
There is a problem with the water intake.
There might be water in the wash cabinet.
 Clean the filter system (see "Cleaning and care -
Filter system").
 Clean the drain pump (see "Frequently asked
questions").
 Clean the non-return valve (see "Frequently asked
questions").
 Remove any kink or loop in the drain hose.