Function 2: Heat Pump Changeover Valve - Honeywell RTH6350 Quick Installation Manual

RTH6350/RTH6450/RET93E0/RET95E0 Series

Function 2: Heat pump changeover valve

Press the or
s
over valve is used in heating or cooling:
NOTE: If Function 2 does not appear, please turn to the
next page to continue.
2
Done
0 Cooling changeover valve: Use this setting if you
connected a wire labeled "O" to the O/B wire terminal
(see page 23).
1 Heating changeover valve: Use this setting if you
connected a wire labeled "B" to the O/B wire terminal
(see page 23).
Press to change setting.
When correct setting is
selected, press NEXT to
display next function.
M28351
button to select whether your change-
t
15
0
Next
M28352
69-2696ES—03