Aluminum Wheel Precautions - Toyota 2007 Matrix Owner's Manual

Replacement with used wheels is not rec-
ommended as they may have been sub-
jected to rough treatment or high mileage
and could fail without warning. Also, bent
wheels which have been straightened may
have structural damage and
should not be used. Never use an inner
tube in a leaking wheel which is designed
for a tubeless tire.
CAUTION
Do not use wheels other than the
manufacturer's recommended size, as
this may cause dangerous handling
characteristics resulting in loss of
control. Otherwise, an accident may
occur resulting in death or serious
injuries.
Initial adjustment of the tire pressure
warning system is necessary after you
have replaced your wheels. See "Tire
pressure warning system" on page 126
in Section 1−7.
280

Aluminum wheel precautions

D
When installing
check that the wheel nuts are tight
after driving your vehicle the first 1600
km (1000 miles).
D
If you have
therefore
changed your tires, check
wheel nuts are still tight after driving
1600 km (1000 miles).
D
When using tire chains, be careful not
to damage the aluminum wheels.
D
Use only Toyota
wrench designed for
wheels.
D When balancing your wheels, use only
Toyota balance weights or equivalent
and a plastic or rubber hammer.
D
As with any wheel, periodically check
your aluminum wheels for damage. If
damaged, replace immediately.
aluminum wheels,
rotated, repaired, or
that the
wheel nuts and
your aluminum