Preparing The Camera; Setting Communication Devices (For Android) - Ricoh WG-M2 Start Manual

Preparing the camera

1
Press and hold the
button in shooting
mode and enable the
wireless LAN (Wi-Fi).
After the waiting for
connection screen appears,
the Wi-Fi function is
enabled.

Setting communication devices (for Android)

1
Enable the wireless LAN (Wi-Fi) function on the
communication device.
2
Start Image Sync on the communication device.
The NFC connection screen appears on the communication
device.
3
Tap [Choose a Network].
The [Choose a Network] screen
appears on the communication
device.
t Memo
• For details on how to use Image
Sync, refer to the Operating Manual
(PDF). (p.39)
SSID
RICOH_
Password
0
4
Tap [RICOH_XXXXX] on
the [Network List].
The [Enter Password] screen
appears.
5
Enter the password, and
tap [Connect].
The camera is connected to the
communication device and the
list of images appears on the
Image Sync screen.
t Memo
• To check the default password, refer to the Operating Manual
(PDF). (p.39)
23