Shooting Mode Settings - Ricoh WG-M2 Start Manual

Shooting mode settings

You can set the shooting mode for movies and still images.
1
Press the button on the shooting screen.
The settings menu is displayed.
2
Press the button or
the button. Select
T [Rec. Mode] and
press the button.
The [Rec. Mode] screen
appears.
See "List of shooting
modes" (p.15) for the
shooting modes that can be selected.
3
Press the button or
the button. Select
the shooting mode
and press the
button.
This brings you back to the
shooting screen.
If you selected [Time-Lapse
Movie] or [Extended Movie
Recording], proceed to step
4.
18
Rec. Mode
OK
Movie
OK
4
For [Time-Lapse Movie], select the speed. For
[Extended Movie Recording], select the
recording time. Press the
Shooting mode Icon
c
C
Time-Lapse Movie
B
E
Extended Movie
D
Recording
e
t Memo
• The current settings for the [Rec. Mode] are saved even when
the camera is turned off.
• By pressing the button while doing settings, you return to
the previous screen with the existing settings.
• The available recording time for [Extended Movie Recording]
differs depending on the [Recorded Pixels (Movie)] (p.16).
For details, refer to the Operating Manual (PDF). (p.39)
button.
Details
You can shoot movies at 30
times the speed.
You can shoot movies at 60
times the speed.
You can shoot movies at
150 times the speed.
Set the recording time to 5
minutes.
Set the recording time to 10
minutes.
Set the recording time to 25
minutes.