Canon EOS Rebel T6 Instruction Manual page 266

3 Custom Function SettingsN
C.Fn-9
You can assign a frequently-used function to <0>. When the camera is ready to
shoot, pressing the <0> button will display the respective function setting screen.
0: Normal (disabled)
1: Image quality
The image quality setting screen will appear. Select the desired
image-recording quality, then press <0>.
2: Flash exposure compensation
The flash exposure compensation setting screen will appear. Set
the adjustment amount, then press <0>.
3: LCD monitor On/Off
You can turn on or off the LCD monitor.
4: Depth-of-field preview
The lens will stop down to the aperture that was set, and you can see the depth
of field (range of acceptable focus) in the viewfinder or in the Live View image.
C.Fn-10
0: Raise built-in flash
1: ISO speed
The ISO speed setting screen will appear. Press the <Y> <Z>
keys or turn the <6> dial to change the ISO speed. You can also
refer to the viewfinder to set the ISO speed.
C.Fn-11
0: Display on
When the power switch is turned on, the shooting settings will be
displayed (p.54).
1: Previous display status
If you pressed the <B> button and turned off the camera while
the LCD monitor was off, the shooting function settings will not be
displayed when you turn on the camera again. This helps to save
battery power. The menu operations and image playback will be
available as usual.
If you pressed the <B> button to display the shooting function
settings and then turned off the camera, the shooting settings will
be displayed when you turn on the camera again.
266
Assign SET button
Flash button function
LCD display when power ON