Auto Rotation Of Vertical Images - Canon EOS Rebel T6 Instruction Manual

Handy Features

3 Auto Rotation of Vertical Images

[OnzD] : The vertical image is automatically rotated during playback

[OnD] : The vertical image is automatically rotated only on the

[Off] : The vertical image is not automatically rotated.

FAQ
The vertical image is not rotated during the image review

immediately after shooting.
Press the <x> button and the image playback will display the
rotated image.
[OnzD] is set, but the image does not rotate during playback.

Auto rotate will not work with vertical images captured while [Auto
rotate] was set to [Off]. If the vertical image is taken while the camera
is pointed up or down, the image may not be rotated automatically for
playback. In such a case, see "Rotating the Image" on page 211.
On the camera's LCD monitor, I want to rotate an image

captured when [OnD] had been set.
Set [OnzD], then play back the image. It will be rotated.
The vertical image does not rotate on the computer screen.

The software used is not compatible with image rotation. Use EOS
software instead.
192
Vertical images are rotated automatically so they
are displayed vertically on the camera's LCD
monitor and on the computer instead of
horizontally. You can change the setting for this
feature.
Under the [51] tab, select [Auto rotate],
then press <0>. The available settings
are described below. Select the desired
setting, then press <0>.
on both the camera's LCD monitor and on the computer.
computer.