Installing The Speakers; Removing The Display-Hinge Cover - Dell Latitude E7250 Owner's Manual

Hide thumbs Also See for Latitude E7250:
Table of Contents

Advertisement

Installing the Speakers

1.
Align the speakers to their original position and tighten the screws to secure the speakers to the
computer.
2.
Route the speaker cable through its routing channel.
3.
Connect the speaker cable to its connector on the system board.
4.
Install:
a.
SIM board
b.
plamrest
c.
keyboard
d.
keyboard trim
e.
SSD card
f.
base cover
g.
battery
5.
Follow the procedures in

Removing the Display-Hinge Cover

1.
Follow the procedures in
2.
Remove:
a.
battery
b.
base cover
c.
keyboard trim
d.
SSD card
e.
palmrest
3.
Remove the screws that secure the display-hinge cover to the computer.
4.
Perform the following steps as shown in the illustration:
a. Remove the screws that secure the display hinge to the computer [1].
b. Remove the display-hinge covers from the computer [2].
22
After Working Inside Your
Before Working Inside Your
computer.
Computer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents