Device Status Lights; Battery Status Lights - Dell Latitude E7240 Owner's Manual

Device Status Lights

Table 14. Device Status Lights
Turns on when you turn on the computer and blinks when the computer is in a power
management mode.
Turns on when the computer reads or writes data.
Turns on steadily or blinks to indicate battery charge status.
Turns on when wireless networking is enabled.
The device status LEDs are usually located either on the top or left side of the keyboard. They display the
storage, battery and wireless devices connectivity and activity. Apart from that they can be useful as a
diagnostic tool when there's a possible failure to the system.
The following table lists how to read the LED codes when possible errors occur.
Table 15. LED Lights
Storage LED Power LED
Blinking Solid
Solid Blinking
Blinking Blinking
Blinking Blinking
Blinking Blinking
Blinking Off
Solid Blinking
Blinking Solid
Off Blinking
Off Blinking

Battery Status Lights

If the computer is connected to an electrical outlet, the battery light operates as follows:
46
Wireless LED Fault Description
Solid A possible processor failure has occurred.
Solid The memory modules are detected but encountered
an error.
Blinking A system board failure has occurred.
Solid A possible graphics card/video failure has occurred.
Off System failed on hard drive initialization OR System
failed in Option ROM initialization.
Blinking The USB controller encountered a problem during
initialization.
Blinking No memory modules are installed/detected.
Blinking The display encountered a problem during
initialization.
Blinking The modem is preventing the system from completing
POST
Off Memory failed to initialize or memory is unsupported.