How To Wire Your Ceiling Fan - Emerson AIRA ECO CF985BS00 Owner's Manual

4. How to Hang Your Ceiling Fan
4.4
Rotate the retaining strap closed (Figure 13) on the
hanger bracket.
Reinstall the socket head cap screw (previously removed).
Securely tighten the socket head cap screw (Figure 13).
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
WARNING
!
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
5.1
Connect the green grounding lead from the hanger ball
and the green grounding lead from the hanger bracket to
the grounding conductor of supply (this may be a bare
wire or wire with green colored insulation). Securely
connect wires with wire connectors supplied (Figure 14).
WARNING
!
This product is designed to use only those parts supplied
with this product and/or any accessories designated
specifically for use with this product by Emerson Electric
Co. Substitution of parts or accessories not designated
for use with this product by Emerson Electric Co. could
result in personal injury or property damage.

5. How to Wire Your Ceiling Fan

Figure 13
GROUND
CONDUCTOR SUPPLY
LISTED WIRE
CONNECTOR
GREEN WIRE
(GROUND) FROM
HANGER BALL
GREEN WIRE
(GROUND) FROM
HANGER BRACKET
Figure 14
!
Turning off wall switch is not sufficient. To avoid possible
electrical shock, be sure electricity is turned off at the
main fuse box before wiring. All wiring must be in
accordance with National and Local codes and the ceiling
fan must be properly grounded as a precaution against
possible electrical shock.
10
(Continued)
RETAINING STRAP
HANGER BRACKET
SOCKET CAP SCREW
HEX WRENCH
WARNING
E.T.L. Model No.: CF985