Playing Discs - Sony DVP-NS700P Service Manual

QQ
3 7 63 1515 0
5 Press X/x to select a language.
The player uses the language selected here to display the DVD menu and subtitles as well.
6 Press ENTER.
The Setup Display for selecting the aspect ratio of the TV to be connected appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
MODE:
7 Press X/x to select the item.
TV Type
4:3 standard TV
A wide-screen TV or 4:3 standard TV with a
wide-screen mode
8 Press ENTER.
The Setup Display for selecting the type of video signal appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
MODE:
9 Press X/x to select the item.
Select PROGRESSIVE only if you have made video connection C (page 18) and wish to
view progressive video signals.
TV Type
Interlace format TV (standard TV)
Progressive format TV
q; Press ENTER.
The Setup Display for selecting the type of jack used to connect your amplifier (receiver)
appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
TE
L 13942296513
26
Enjoying the surround sound effects
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in page 20 to 24
( through ). Each of these are the default settings and do not need to be adjusted when
B D
you first connect the player. Refer to page 67 for using the Setup Display.
Audio Connection (page 20 to 24)
A
No additional settings are needed.
B-1
C-1
Item You select
DOWNMIX DOLBY SURROUND
• If the sound distorts even when the volume is turned down, set "AUDIO ATT" to "ON" (page 74).
B-2 C-2 D
Item You select
DOWNMIX DOLBY SURROUND
DIGITAL OUT ON
www
.
28
http://www.xiaoyu163.com
4:3 LETTER BOX
4:3 LETTER BOX
4:3 PAN SCAN
16:9
AUTO
You select Page
4:3 LETTER BOX or 4:3 PAN 69
SCAN
16:9 69
4:3 LETTER BOX
ON
JACKET PICTURE
INTERLACE
INTERLACE
PROGRESSIVE
You select Page
INTERLACE 70
PROGRESSIVE 70
Page
74
Page
74
75
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
qa Press X/x to select the item, then press ENTER.
• When "NO" or "LINE OUTPUT L/R (AUDIO)" is selected, Quick Setup is finished and
connections are complete.
• When "DIGITAL OUTPUT" is selected, the Setup Display for "DOLBY DIGITAL"
appears. Proceed to Step qs.
qs Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 22 to 24 (
through ).
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
Audio Cord Connection Type
B-2 C-2
D
qd Press ENTER.
DTS is selected.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
qf Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 22 to 24 (
through ).
D
Audio Cord Connection Type
B-2 C-2
D
qg Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
Q Q
To run Quick Setup a second time, select "QUICK" under "SETUP" in the Control Menu (page 67).
3 6 7 1 3 1 5

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
POWER
H A x
Power indicator
[/1
1 2 3
4 5 6
7 8 9
0
AUDIO
x
H
1
Turn on your TV.
2
Switch the input selector on the TV
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel.
3
Press POWER on the player.
The player enters standby mode and the
power indicator lights up in red.
co
.
1-6
9 4 2 8
B
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
D-PCM
DOLBY DIGITAL
You select Page
D-PCM 75
DOLBY DIGITAL (only if the 75
amplifier/receiver has a Dolby
Digital decoder)
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
OFF
OFF
ON
B
You select Page
OFF 75
ON (only if the amplifier/receiver 75
has a DTS decoder)
0 5 8 2 9 9 4
continued
4
Press A on the player, and place a
disc on the disc tray.
The player automatically turns on and
the power indicator lights up in green.
With the playback side facing down
5
Press H.
The disc tray closes, and the player
starts playback (continuous play).
Adjust the volume on the TV or the
amplifier (receiver).
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD (page 32), VIDEO CD (page
33).
To turn on the player
Press POWER on the player. The player
enters standby mode and the power indicator
lights up in red. Press [/1 on the remote. The
player turns on and the power indicator lights
up in green. In standby mode, the player also
turns on by pressing A on the player or by
pressing H.
To turn off the player
m
Press [/1 on the remote. The player enters
standby mode and the power indicator lights
up in red. To turn off the player completely,
press POWER on the player. While playing a
disc, do not turn off the player by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press x to stop playback and then press [/1
on the remote.
continued
9 9
2 8 9 9
27
29