Please ensure that you have the product’s model no and serial no available when you call. These can be found on the silver data label on your product. Alternatively, general information, spares and service information is available from our website: www.stoves.co.uk...
BEFORE USING YOUR HOB • Make sure that you have removed all packaging, wrappings, stickers and fi lms from the hob surface. • It is recommended that you clean and wash the hob surface before using for the fi rst time. •...
SAFETY ELECTRIC HOB Never leave any cook zone on without a pan covering it. This causes a fi re Always ensure that pan bases are hazard. dry and fl at before using them on the hob. Do not use the hob surface as a chopping board or food preparation Always position pans over the centre area, as this may lead to it becoming...
Page 6
SAFETY Fire Safety Advice If you have an electrical fi re in the kitchen: Most kitchen fi res occur when 1) Pull the plug out, or switch off the people are distracted or leave things power at the fuse box - this may be unattended, so remember: enough to stop the fi...
USING THE HOB Warnings • Do not use the ceramic hob if the glass surface is cracked, as electrical parts are directly beneath. Switch off the appliance at the supply to prevent electric shock and contact your supplier. • The hob surface remains hot after use.
Page 8
USING THE HOB • Use pans which are large enough for Energy Saving the foods inside to avoid over fl owing • Position pans centrally over the - this may cause damage to your hob. elements. • Pans with dull or dark coloured bases •...
CLEANING ELECTRIC HOB • To prime: Switch on each element in turn for a short while (with no pan on Ceramic glass hobs it) at a medium - high setting. This will harden and burn off the coating. • The ceramic hob top can be cleaned using a clean, damp cloth or kitchen •...
INSTALLATION General information Installation should only be carried out by a qualifi ed installer or engineer. Please keep to the following points most carefully; Although every care has been taken to ensure this appliance has no burrs, or sharp edges, We recommend that you wear protective gloves when installing and moving this appliance.
Page 11
INSTALLATION POSITIONING Apply the self adhesive seal to the The hob is designed to be built into a underside edges of the hob glass. For worktop as detalied below. best results, the seal should be adhered along each side in turn, as close to the (cut-out dimensions Fig.1B).
Page 12
INSTALLATION Connect to the electricity supply Warning: This appliance must be earthed. The hob must be installed by a compe- tent electrician, using a suitable double pole control unit, with 3mm minimum contact separation at all poles. We recommend that the appliance is connected by a competent person who is a member of a “Competent Person Scheme”...
TECHNICAL DATA Total Power Rating @ 220 -240V ~ 50Hz = 6.3kW Cook Zone Power Rating kW Hob Dimensions (W X D x H) mm 580 X 510 X 48 Cut Out Required (W x D) mm 560 x 495...
CUSTOMER CARE Customer Care Webshop Having purchased a superior cooker, hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manufacturer? We offer a range of over 30,000 different accessories and components which will instantly give your cooker a good as new look Including Control Knobs, Oven...
Page 15
Engineer’s name For customers outside the UK and Northern Ireland, please contact your local supplier. Glen Dimplex Home Appliances Limited is the owner of the Stoves brand and is part of the Glen Dimplex group of companies. Glen Dimplex Home Appliances, Stoney Lane, Prescot, Merseyside, L35 2XW...
Need help?
Do you have a question about the SEH600CR and is the answer not in the manual?
Questions and answers