1080 Vibrator Motor - Lenovo TAB 2 A7-30F Hardware Maintenance Manual

1080 Vibrator motor

For access, remove the following FRU:
• "1010 Rear cover and side key" on page 28
and
Detach the following FPC and FRUs:
• Battery FPC (see Step 1 on page 30 to Step 3 on page 31 in "1020 Battery
pack")
• Speaker (see Step 2 on page 36 in "1040 Speaker")
• Main board (see Step 1 on page 45 to Step 3 on page 46 in "1070 Main board
assembly (with antenna chip, microphone, vibrator motor, speaker, side key
FPC, and front camera)")
1. Desolder the wires of the vibrator motor from their connecting points on the
main board at the position shown in the figure below.
Figure 8-1. Position for desoldering the wires of the vibrator motor
Lenovo TAB 2 A7-30
49