D-Link DWL-8200AP User Manual page 23

SSID Broadcast:
Channel:
Auto Channel Scan:
Remote AP MAC
Address:
WDS Site Survey:
Authentication:
D-Link DWL-800AP User Manual
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Displays the default channel for the wireless network. All devices
on the network must share the same channel. The channel of an
802.11a network may not be set manually in certain regions (e.g.
Europe and USA) in order to comply with DFS (Dynamic Frequency
Selection).
Note: The wireless adapters will automatically scan and match the
wireless setting.
This option is unavailable in WDS with AP mode.
Enter the MAC addresses of the APs in your network that
will serve as bridges to wirelessly connect multiple networks.
Click on the Scan button to search for available wireless networks.
Click on the network you want to connect to.
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Personal to secure your network using a password
and dynamic key changes. (No RADIUS server required.)
Select WPA2-Personal to secure your network using a password
and dynamic key changes. No RADIUS server required and
encryption of data is upgraded with the Advanced Encryption
Standard (AES).
Select WPA-Auto-Personal to allow the client to either use
WPA-Personal or WPA2-Personal.