Advertisement
Step-by-Step Procedure
Important Before you begin this procedure confirm that the current version EC BIOS running on the
ML910 notebook is 4.7 or earlier. If the EC BIOS is 4.8 or later you will not need to update it, i.e., skip
steps 11 through 14 in the EC BIOS Upgrade Procedure. Steps 1 through 10 will still be required in
order to access the applications files from the downloaded ISO image.
To determine the EC BIOS version:
a. Double click on the ML User Application icon in the System Tray.
b. Check the EC Version where highlighted below.
If you intend to use the Nero 8 Essentials application, install it if it has not already been installed. You
may select a "Typical" installation, which is sufficient for this procedure.
As a standard practice when performing procedures like this, it is
recommended that critical user data be backed up in the event an error or
problem occurs.
ML910 R1.0 RF Pass-through Upgrade Procedure, Version A
Caution
3
Advertisement
