Advertisement
5.
Launch the ML User Application.
6.
Select the RF Pass-through option available in the MLUA.
7.
Before the RF Pass-through User Control in MLAA is changed to [Enable], the RF
Pass-Through Control will be grayed-out.
8.
After the RF Pass-through User Control in MLAA has been set to [Enable], the default setting
will be [Automatic Selection].
9.
User can select [Manual Selection] to either Enable or Disable the RF Pass-Through. [Apply]
needs to be pressed by User in order to make the selection valid.
10. Enabling the RF Pass-Through will disable the Internal Antenna and vice versa.
20
1
3
ML910 R1.0 RF Pass-through Upgrade Procedure, Version A
2
4
Advertisement
